Incorporating self-sealing lips that provide flexibility and eliminates the need to silicone the joint for installation. Pipetites can be adapted to fit most pipe or tube diameters & allows pipe to move significantly without causing damage or breaking the seal between wall and pipe.

The standard design is primary suited to new installations.

Available in 7 sizes (0 - 380mm tube/pipe)

Hygienic white silicone (FDA certified)

316 stainless steel support ring

Totally self-sealing (no additional sealant)

Seal is flexible to accommodate movement

No cracking of silicone

-60°C - 260°C temperature rating

Predrilled for quick and easy installation

Has all the virtues of the standard design, however the Re-Boot Pipetite can be adapted to fit most existing pipe or tube installations. The split design and unique stainless steel staple allows for quick and secure installation.

Available in sizes 0 to 380mm tube/pipe

Hygienic white silicone (FDA certified)

316 stainless steel support ring

Totally self-sealing (no additional sealant)

Seal is flexible to accommodate movement

No cracking of silicone

-60°C - 260°C temperature rating

Predrilled for quick and easy installation

Pipetite Grommet's base incorporates a groove suitable for sheet steel up to 3mm thick. An installed Grommet provides full flexibility with no additional sealant required for fast, cheap & easy installation. Grommet's can be adapted to fit most pipe or tube diameters and allow the pipe to move significantly without causing damage or breaking the seal between the sheet and pipe.

Available in sizes 0 to 180mm tube/pipe

Hygienic white silicone (FDA certified)

Totally self-sealing (no additional sealant)

Seal is flexible to accommodate movement

No cracking of silicone

-60°C - 260°C temperature rating

Pipetite Pipe in Pipe can seal a smaller tube that's centrally located inside a larger tube whilst allowing for movement of the pipe. Designed for transitions from 100mm & 150mm outer tubes.

Perfect for:

Sealing the gap between steam pipes running through wall penetration tube.

Tubes passing through walkways.

Hygienic white silicone (FDA certified)

Totally self-sealing (no additional sealant)

Seal is flexible to accommodate movement

No cracking of silicone

-60°C - 260°C temperature rating

Pipetite Pneumatic Grommet's base incorporates a groove suitable for sheet steel up to 3mm thick. Using the same penetration hole size means uniformity on design and neat lines on installation. An installed Pneumatic Grommet provides full flexibility and no additional sealant is required during installation. The Pneumatic Grommet is available to suit 4 standard diameters and allows the tube to move significantly without causing damage or breaking the seal between the sheet and tube.

Available in 4 sizes to suit 6, 8, 10, 12mm pneumatic tube or electrical cables

Hygienic white silicone (FDA certified)

Totally self-sealing (no additional sealant)

Seal is flexible to accommodate movement

No cracking of silicone

-60°C - 260°C temperature rating

Now with IP68 Rating

Unique stainless steel anchors specially designed for a smooth clean hygienic finish to the Pipetite surface. This is achieved through the special domed head on the anchor.

The specially selected thread form ensures an immensely secure retention for any installation on hard walls or ceilings.